Omar Romero: Chevy tahoe 2007 my question is ac controllers are good and so are all the
blend doors, stuck on heat blowing thru defroster but blows air just fine,
is there another module or does the bcm controls the the blend door
Amber Ward: I have a 02 Tahoe. When I turn the fan up it makes a grinding sound. Should
I try to replace the fan motor?
Jose Barajas: Hi i was wondering if you can help me out I have a 2004 gmc yukon xl im
having trouble figuring out whats the problem my a/c and heater stopped
working the compressor turnes hnder the hood but no cold or hot air comes
out but the rear a/c does work any help please? And thank you
Price A: weird question, my tahoe has heat, but it smells terrible. what do you
think i should do?
Steve Brown: THANK YOU!!!!!!! I almost started taking the airbox out! Super easy, great
camera and instructions, AND I found what looks like the dirty, plugged
original cabin air filter. Thanks again, Steve
Travis Bland: so once you remove the cover, there is what looks like a door next to the
motor that I cant figure out how to open, or how is there air suppose to
move thru, cause my problem is the air isn't coming out of the air ducts,
but the motor is working! just can't figure out how to get the air to flow,
and it looks like this door thing that I cant get open is keeping it from
circulating? I need your help please? I don't know how else to explain it,
but I hope I explained it half way right, so that you might be able to make
since of it!!
Tazh702: Thanx 1aauto!!! It was easy! I followed you step by step and BAM cold ac in
my '01 Silverado! You def saved me $$$. I subscribed and will continue to
learn way to repair my vehicles. Great channel and again, THANX!
Phill Hansen: I have a 2001 1500 extended cab and it looks slightly different from this
under the kick panel. Is mine still a twist out motor mount?
Mark Olsen: I have a 2000 Chevy Silverado 2500, the heater works on all speeds except
Hi. I've replaced the resistor twice. What do you think the problem is.
Classic Gamers HQ: What can be done if the tab is broken? The motor twists and stays put, but
now no tab to secure it.
humourcar: Great video. Thanks! Just replaced my blower motor and cabin air filters
while I was in there. Nice to know what tools I need before I start instead
of making trips back and forth to the tool box...especially when I'm
working in my driveway in the middle of winter. Do you guys ship to Canada?
gavin morrison: I have a 2000 Tahoe, and I went to start it up to warm it up and the heater
fan wouldn't blow and then smoke started blowing up thru where the
defroster comes out and it smelled like wires burning, so do you think the
heater blower wires burnt up or what else could it be?
daltonaydell8: What is the part number for the cover that covers everything? That black
plastic piece that you had to take off to get to the motor.
bruce Ivanovich: I have a 1999 Short box, Standard cab and until now, 15 years later, the
blower speeds have gone 1 at a time over the last month. Now, with this
sub-zero weather, all I have left is #4. Vas gibst? What should, or what
can I do??
1A Auto Parts: @jad467 Usually they are located on the passenger side under the dash. We
carry them on our website. Here's a link to them.
1A Auto Parts: Thanks for watching. 1aauto.com 888-844-3393
jarrit2375: Thank you so much for this video it helped me alot!
bholzwarth: Mike, I just wanted to say thanks for the great video! You made blower
motor removal a breeze man. Keep up the great work!
Chris Abram: I have air blowing but it doesn't blow as powerful as it used to. The AC no
longer recycles the inside air which is when it used to blow much harder.
I'm assuming that the replacement you show in this video would fix my
problem? All air is exterior air, so in the Texas heat I have a little cold
air that hardly blows thru the vents and so I end up sucking in all the
fumes from every other vehicle around me on the road.
Justin Runi: How come mine cant be in that easy of a spot >.> no mines gotta have one
bolt in an unreachable place >.<
1A Auto Parts: @bjbenbj It could be the blower motor resistor, or possibly the switch.
1A Auto Parts: You're welcome. Have a great day!
Clay Mauldin: How do you remove the motor blower from a '98 Chevy Tahoe? It looks like
it's a little more difficult than the '99+ year models....
1A Auto Parts: @bjbenbj We haven't done a video on a 98 Tahoe blower motor, but the
procedure may be very close.
1A Auto Parts: @SuperNutellaontoast We carry new ones with free shipping on our website
1aauto.com All you need to do is enter in your vehicle information, and the
correct ones will come up for you. Hope this helps you out.
kelboswell: This does not relate to the '99 Tahoe. My '99 is the older body style.
Wesley Vaughn: Great vidieo... thanks!
1A Auto Parts: I would check the simple things first such as the fuse, and also check the
lead to the blower motor to see if there's power going to it. If there is,
then the blower motor may likely be bad. Hope this helps you out.
Ben762x51: Good video. I have a 2001 blazer, and the fan selector (as in selecting
face, feet, etc) won't switch. It is stuck on the face setting. the heat,
and fan works fine, but I can't choose any other setting. Any idea on what
this could be/how to fix? Would it be the same problem as you are showing
michael davis: I have a 94 GMC sierra. And everytime i start my truck, it makes this loud
screeching/knocking noise under the glove department. and doesn't stop
until after i kill the truck. The air is cold. The fan blows. But the
noise... Any ideas?
Teejay Foley: I guess I should have added in that it worked on 1-2-3-4 but not on 5 for a
couple of months then when I started it one morning none of the settings
would work. Im going to check the fuses tomorrow when I get home from work
hopefully its as easy as a 5 dollar fuse thanks.
Marcus Williams: This is awesome work guys, you saved me 160 bucks. I purchased the blower
motor myself instead of buying at the dealer, that alone saved me 100
bucks. I followed the video step by step and saved another 60 buck in
labor. So thank you so much guys.
hdsz066: I could not turn my fan on above two clicks or it made a lot of noise.
After finding the smallest of several small ratchet heads, I got the back
screw off! 1/4" on the head size of the ratchet makes a difference. Found a
dead mouse in the blower wheel. Wondered what that smell was! It is nice
and quiet now. Thanks for the video!
1A Auto Parts: It could be that the blower motor is getting tired. You could also remove
the blower motor to see if there's any debris caught in the blower motor
cage that might also be causing this issue. Hope this helps you out. We
carry new blower motors on our website 1aauto.com 888-844-3393
Keenan Kelly: I have a 2001 gmc seirra 1500 and its making that loud humming noise
underneath the glove box when i crank the AC up to 3, 4, and 5. By
replacing the blower motor it will more than likely solve this problem?
Jesus Delgado: where can I find my blower motor on my '04 Avalanche? Can it be easy to
install a new blower motor because I would hate going to a service station
and have it replace and pay for much? Would be nice if I get a reply from
you. Thanks. :)
Fidel Pelayo: Thanks for this video. Directions on filter box doesn't mention inner
1A Auto Parts: @9632147miguel If it blows air it is not your blower motor. Sounds like
your problem could be your air door actuator. As of right now I don't have
a video for that.
SuperNutellaontoast: were changing this on my 99 silverado and what size or what would i ask for
when buying a new blower be getting it a a junk yard so please answer
Trent Meunier: I have a 2005 Silverado. My AC stopped this past weekend. 2 years ago I
lost function from setting 1,2,3 and 4 on the fan speed. 5 has been working
fine but that stopped this weekend. It came back on a few times but
shortly. Cold air is seeping out but no pressure. I called the Chevy
dealership, they want $150 per hour for 3 hours to dianose this. I have
read multiple reports of Chevys having this issue. Some say the wires are
fried. Any thoughts? Its so hot out!!!! Thanks!
OUTFITRIDERS: Is it about the same for a 92 Chevy truck also?
1A Auto Parts: You may want to check the fuses and the wire going to the fan motor to see
if there's power going to it.
Matt Harris: I'm about to change my heater blower motor on my 2000 silverado tomorrow,
but im concerned that it may not be the cause of my problem, see my heat
was cutting in and out for about a week, a light kick under the glove box
was providing temporary support, but one day i smelt burring plastic, so i
put my head under the glove box to inspect the problem and i saw flames
shooting out of something down there, i turned my heat off so my truck
didnt light up, and i havent had heat sense. any ideas?
1A Auto Parts: You may want to make sure that the correct fuse is in the slot on that
circuit. Also check the plug end to see if the wires are burnt or melted,
if they are then you should repair them. Hope this helps you out 1aauto.com
1A Auto Parts: @reposado28 It could either be the blower motor resistor or maybe even a
loose connection or wire somewhere. I would check to see if there's power
to the blower motor and the resistor with a test light.
theknightlynews: I am replacing my 1975 mercedes 300D blower motor. In that car, Mercedes
installed the blower motor first, and then built the car around it. The
shop time to change that is about 12 hours. So I did the work myself and
saved about $1500. Unfortunately, the motor is $500 and those blower motors
were the bladed ones, not the squirrel cages and nobody makes those anymore
so I can't use a generic motor from some American car. I'm so screwed. Got
1A Auto Parts: If the blower motors is what's creating the noise, then it should solve the
issue for you.
1A Auto Parts: @1ChevyGuy375 Yes they squeal when they are going or they get and
1A Auto Parts: HI Corbett, You may want to check the connection going to the blower motor
to see if it's loose, which might be causing this issue. Hope this helps
you out. 1aauto.com 888-844-3393
Jake Brandt: The connection between the two in the plug is burn on the thing metal
sheets inside the plug. Should i buy a resistor and a new adapter or get
all three. By the way sometimes but rarely the motor will blow and then
after like 3 minutes it goes off and doesnt start up again.