Fat White Boy: That's a lot of trouble for a mere 30cc increase.
Fat White Boy: It would have been easier to trade it in for a SH300.
777mrpelon: He said he's a fart smeller. Instead of smart feller. Lmao genius
GodfatherMaxi: I have a question, you have only widened the hole and you put a cylinder is gate largest and strongest engine?
T5646766: ? what state you in?
warmonkey80: ive done this with a dremel tool. takes longer but same thing. also can use a dremel tool too open up the crank case area too put in a stroker crank.
Rodrigo Valdes C.: Where Did you get that drill bit ? or How can you use it?
wippy748s: @k9forkids 150-180cc
ridemyrice: Looks like nice work; did you really put just a level on top of the deck surface- parallelism to the floor really is of no importance- or did you run an indicator in X&Y axes before you swept the bore to be sure the existing surface was paralell to the table travels?
k9forkids: no my friend it is a 30ccm increase , 150ccm-180ccm
fiatnutz: I think he said it took the displacement from 50cc to 80cc.
k9forkids: Do you know What the Customer had to say about the Displacement increase?
fiatnutz: Since I hever did one of those, my guess is probably te same way - bore the block to fit a larger bore cylinder. Take a look at the cylinder kit and see what the instructions have to say.
Ryan Murtagh: how do u fit a bore kit on a honda NSR 50
fiatnutz: If you've got the equipment and skill, anybody should be able to figure this out. Yes, boring the 200 is no problem, valve jobs and other crap - no problem either.
Will Thornton: only you can do this? thats what the desciption said. looks pretty damn simple. i think i could probably do this with the right stuff. and can you bore out a ford 200 six? i need some power out of it. what about valve jobs and crap? message me if you are interested.
pantherxx010: will this guys let you know if he getting more speed?
MCRmechanic: more displacement = more power
which usually equals more speed unless u are limited by gear ratios, ect.
fiatnutz: He also has a big valve head and claims that his top speed will approach 80 mph, up from 60 mph. That's all I know.