Daimon Walker: I had to replace the T315XW02 V6 PCB. Specifically the AS15-F chip can be replaced but I can't solder for toffee! So it was a case of changing the entire PCB.
T-Con boards, check them out.
DyaLikeDagz: How did you get from 0:51 to 0:52 though??
John Harty: Hello- I have a Samsung LA37A550. The picture suddenly faded and is all pale and washed out. I can see the image but it is very pale and has lost its color. The repair shop says it is the panel and they cannot supply. After watching your informative videos I think it could be the T-Con board. Any ideas please?
Luke Sultana: First of all, well done for the vids! Secondly, I think my Samsung TV has this issue. Shall I perform a factory reset or full a full factory reset before following the procedure you explained in the video? Many thanks!
sopheap marosa: How about LG TV, we do the same as you showed?
Dan Renwick: I smacked the back of my TV and it fixed it. Seriously. I spent over an hour updating firmware, resetting to factory defaults, playing with color levels. I read that someone smacked the back so I tried this and it worked.
Jens Lundsgaard: hey bro.. im in my service menu. and i have located the ddr thing. but it is gray and i cant acces it.. do you know why?
Nathan Willey: I have the same problem for proscan 37lb30q LCD TV. Can you suggest how I can access the service menu? Or buy a service manual?
Anthony Ruiz: FIXED! On my Samsung I went into the service menu and in the options I didn't find the DDR option. Instead I found EER reset in options clicked it and when I turned on my tv it worked. Note.Before I did this i opened my tv and made sure to check if any cables were loose.
DESIMUNDA2K7: im having trouble getting in to the service menu without the remote....can you please help???
Sunday Jackson: I have a similar problem with my Samsung galaxy tab N8000 10.0 pls. what should i do.
Ευαγγελία Τζιώτα: i have a samsung UE46D6000 led tv.i turn on the tv and after a min of operation go to standby.can you help me?
Aquatic Life: What did you put in for your service menu?
Yasir Saleem: okay now my menu is available and i was enter in service menu but there was no DDR option what i will do ?? i have same problem :( i
Yasir Saleem: Sir I have sumsung 32e420 when I was factroy restore then menu not available and channels not seen plz help
dird89: I've got le37a457c1d but mute+1+8+2+power doesn't work for me? all it does it turn on the tv
kabile reisi: turn gamma off or change panel number
hoopfan71: Some ghost image issues are caused by a bad gamma IC on the t-con. You can either replace the t-con or replace the AS15 IC on the t-con. If you have the skills, replacing the IC is best, as installing a used board may yield the same failure over time.
Palvindar Chhokar:+alwaysafix I have a samsung LE40A557p2F and the image is solarised. I've tried changing the service menu options, however that didn't make a difference, could you please give some guidance as to what I can do now.
alwaysafix: @alma soriano Have you tried all of those options? Good luck.
Fix for Samsung lcd TV colour display problem5
out of 5